↑ Return to Downloads

Stock ROM Guru Reset Downloads

 

Stock ROM – Guru Reset Downloads



I have started to construct some stock ROM zip files that can be flashed in recovery (CWM/TWRP) to install the HTC One stock ROM for many different versions of the phone. You can also choose to install the stock Radio and also the stock Recovery.  The part about the stock recovery is important, because if you want to get OTA updates you will need the stock recovery.

Remember in order to be able to flash a recovery (stock or otherwise) your bootloader needs to be unlocked.So if you want to flash the stock recovery during the install you will need to make sure to have a unlocked bootloader.

If you are using the correct version for your phone, accepting an OTA update is one way of upgrading your firmware if you are S-On.  After the OTA update you can go back to flashing custom ROM’s if you wish and then you will be running on the current firmware for your device.

I have tested the 2.24.xxx.x ROM’s on all new firmware and the touch screen works without issues. So those packages should work for most everyone who just needs stock unbranded 4.2.2 HTC software and already has a firmware version of at least 2.xx.xxx.x.

However the 1.29.xxx ROM’s do not have a functioning touchscreen on 2.24 or higher firmware. You will need to either downgrade firmware with a RUU if S-off or use the 2.24 package. Since at least 2.24 has rolled out everywhere that I am aware, I don’t think you would need to install the old 1.29 rom.
***NOTE- Sprint received their touchscreen update at a different version point. The 1.31 Sprint version will not have functioning touchscreen on 1.29 firmware so just use the 1.29 package if needed.

If you don’t have a functioning touchscreen due to firmware not matching the stock rom software, you can use an OTG cable to attach a USB mouse and accept the OTA update which will bring your firmware current.

 

That is why the best method of resetting is to use a RUU or RUU.zip.  However there are lots of users who still have s-on and cannot run a RUU.  So this is the best I could do for those with S-On, a poor mans RUU if you will.  It essentially is like restoring a stock backup or the software from RUU’s through recovery using the GUI of the aroma installer.

This is great because after you restore the stock rom and the stock recovery you will be able to get OTA updates if you are using it on the correct phone type.

Here is a little video of the installation of the stock rom and recovery using the Guru Reset Tool.

This video was made to demonstrate installing the stock rom for AT&T 1.26.502.15 in order to get the Android 4.3 OTA update.  It also demonstrates using a mouse and OTG cable for touchscreen control when firmware doesn’t match.

I will eventually make more videos to demo more versions of the Guru Reset’s.

 

You can use this version information for ROM compatibility:

Here are the screenshots from the stock 2.24.401.1 ROM install:




As long as you chose to install the stock recovery and didn’t add root, all you should have to do is re-lock your bootloader after this and you will be almost out of the box stock.  It should not be needed for OTA updates but if you want you can re-lock your bootloader with this fastboot command if you are S-On:

fastboot oem relock

If you are S-Off then you can use this command:

fastboot oem lock

However if you are S-off then you could also use the command is THIS thread.

If using revone (This may result in data loss):

./revone -l

One difference from complete stock is that your bootloader will say RELOCKED instead of LOCKED. You more than likely will also have the Tampered flag showing on the bootloader as well. A few users have reported removing Tampered when restoring their phone with S-on, but most will find that with S-on you can not get rid of the Tampered. In order to get it back to it was out the box which is LOCKED and no Tampered, you need S-off.

Information on how to get S-Off located HERE thread.

This Toolkit can help you easily perform many common tasks such as
Installing HTC Drivers
Basic ADB and fastboot commands
Sideload or Push a File using ADB
Revone S-Off
Bootloader locking and unlocking
Flash Recovery
Root device
Change MID and CID
Toolkit can be found here:

http://forum.xda-developers.com/showthread.php?t=2364445

 

The Downloads for the Stock ROM with aroma installer are here:


Guru Reset M7 3.62.401.1
File Size: 1.1 GiB - Downloads: 28206
MD5: 6444b41a1f332f31345d5ead674382d7
Comments: Stock rom 3.62.401.1 with graphical aroma installer.  Includes the ability to flash the Stock Radio and Stock Recovery also.

Stock ROM version for these types:
modelid: PN0710000
cid: HTC__001, HTC__E11
HTC__102, HTC__203
HTC__405, HTC__Y13
HTC__304, HTC__032
HTC__A07, HTC__J15
HTC__016


Guru Reset M7 3.63.707.4
File Size: 1.1 GiB - Downloads: 25509
MD5: 6aba67e56889124c4ab5188bba15a569
Comments: Stock Asia/India (World Wide English) ROM 3.63.707.4 with graphical aroma installer. Includes the ability to flash the Stock Recovery and also Stock Radio.

Future OTA Updates will work when available.

modelid: PN0711000
modelid: PN0714000

cidnum: HTC__044
cidnum: HTC__038

Guru Reset M7 3.22.661.1
File Size: 1.1 GiB - Downloads: 511
MD5: ba876502d7311955d5e6e839b0af74d0
Comments: Stock Telus (Canada) ROM 3.22.661.1 with graphical aroma installer. Includes the ability to flash the Stock Recovery and also Stock Radio.

OTA Updates when available.

modelid: PN0712000
cidnum: TELUS001

Guru Reset M7 3.22.1540.1
File Size: 1.1 GiB - Downloads: 4536
MD5: 21325c8a7737b4521ee392d7af9333e1
Comments: Stock rom 3.22.1540.1 with graphical aroma installer.  Includes the ability to flash the stock Radio from 3.22.1540.1 and Stock Recovery also.

Stock ROM version for these types:
modelid: PN0712000
cidnum: BS_US001

Guru Reset M7 2.24.73.1
File Size: 1.0 GiB - Downloads: 253
MD5: cdc043cd7941f8157e1e16aa3d549a9a
Comments: Stock Orange FR (France) ROM 2.24.73.1 with graphical aroma installer. Includes the ability to flash the stock Recovery and also stock Radio.

OTA Updates
mid: PN0710000

cid: ORANG202

Guru Reset M7 2.24.111.3
File Size: 1.0 GiB - Downloads: 1425
MD5: bf991f8a4767249da5238502befcc627
Comments: Stock T-Mobile Germany ROM 2.24.111.3 with graphical aroma installer.  Includes the ability to flash the stock Recovery and also Radio.
OTA Updates, when available.

mid: PN0710000
cid: T-MOB101

Guru Reset M7 2.24.161.1
File Size: 1.1 GiB - Downloads: 1341
MD5: 81bda125ec09b57255024526b1952ca5
Comments: Stock Vodafone UK ROM 2.24.161.1 with graphical aroma installer.  Includes the ability to flash the Stock Recovery and also Stock Radio.
OTA Updates, when available.

modelid: PN0710000
cidnum: VODAP001
cidnum: VODAP102
cidnum: VODAPE17
cidnum: VODAP405
cidnum: VODAP304
cidnum: VODAPD18
cidnum: VODAP120
cidnum: VODAP110

**NOTE** This file was updated on 10-28-2013 to include the correct stock recovery.

Guru Reset M7 2.24.771.3
File Size: 1.0 GiB - Downloads: 773
MD5: 4226b81cb1dfd483f36b6d4a75e1474e
Comments: Stock Hutchison 3G UK ROM 2.24.771.3 with graphical aroma installer.  Includes the ability to flash the stock Recovery and also stock Radio.
OTA Updates, when available.

mid: PN0710000

cid:  H3G__001
H3G__G04
H3G__106
H3G__402

Guru Reset M7 2.24.709.1
File Size: 1.1 GiB - Downloads: 4290
MD5: 63450bd4f77a8c8eb1b5e0c542758573
Comments: Stock Asia TW (Taiwan) ROM 2.24.709.1 with graphical aroma installer.  Includes the ability to flash the stock Recovery and also Radio.

OTA Updates immediately!
mid: PN0711000
cid: HTC__621

Guru Reset M7 2.24.841.1
File Size: 1.0 GiB - Downloads: 553
MD5: ca37c13808ba61bd48b91ac1cd25e480
Comments: Stock Telstra WWE (Australia) ROM 2.24.841.1 with graphical aroma installer. Includes the ability to flash the stock Recovery and also stock Radio.

OTA Updates

mid: PN0714000

cid: TELST001


Guru Reset M7 2.24.401.8
File Size: 1.0 GiB - Downloads: 8208
MD5: b576ec69ff7ea86d4be2dbc3a8e15cc0
Comments: Stock rom 2.24.401.8 with graphical aroma installer.  Includes the ability to flash the Stock Radio and Stock Recovery also.

Stock ROM version for these types:
modelid: PN0710000
cid: HTC__001, HTC__E11
HTC__102, HTC__203
HTC__405, HTC__Y13
HTC__304, HTC__032
HTC__A07, HTC__J15
HTC__016

Guru Reset M7 2.24.401.1
File Size: 1.0 GiB - Downloads: 6368
MD5: a5e4b3f512a6aa6b9acf2e9a4b6ee995
Comments: Stock ROM 2.24.401.1 with graphical aroma installer.  Includes the ability to flash the Stock Radio and also Stock Recovery.

Original software version for these types:
modelid: PN0710000
cid: HTC__001, HTC__E11
HTC__102, HTC__203
HTC__405, HTC__Y13
HTC__304, HTC__032
HTC__A07, HTC__J15
HTC__016

Guru Reset M7 2.24.163.2
File Size: 1.0 GiB - Downloads: 326
MD5: ce009d2262fa1f98f7800ec69680180a
Comments: Stock rom 2.24.163.2 with graphical aroma installer.  Includes the ability to flash the stock Radio and Recovery also.

Vodafone FR (France) (SFR)

modelid: PN0710000
cid: VODAP203

Guru Reset M7 2.24.1020.1
File Size: 1022.7 MiB - Downloads: 375
MD5: 9cfb71bdb6919521a459211e80f63cf5
Comments: Stock Bouygues Telecom (France) ROM 2.24.1020.1 with graphical aroma installer. Includes the ability to flash the stock Recovery and also stock Radio.

OTA Updates Do Not work on this ROM
mid: PN0710000

cid: HTC__247

Guru Reset M7 2.24.980.2
File Size: 1020.7 MiB - Downloads: 593
MD5: d530dcef4cf842e3ba87457da5226e2c
Comments: Stock Optus (Australia) ROM 2.24.980.2 with graphical aroma installer. Includes the ability to flash the Stock Recovery and also Stock Radio.

OTA Updates when available.

mid: PN0714000
cid: OPTUS001
TELNZ001
VODAP021
HTC__039

Guru Reset M7 2.24.707.1
File Size: 1.0 GiB - Downloads: 7061
MD5: e9f6aba0e6cd997899382cbda2da1ebe
Comments: Stock rom 2.24.707.1 with graphical aroma installer.  Includes the ability to flash the Stock Radio from 2.24.701.1 and also Stock Recovery.

Stock ROM version for these types:
modelid: PN0714000
modelid: PN0710000
cidnum: HTC__044


Guru Reset M7 2.24.707.1
File Size: 1.0 GiB - Downloads: 7061
MD5: e9f6aba0e6cd997899382cbda2da1ebe
Comments: Stock rom 2.24.707.1 with graphical aroma installer.  Includes the ability to flash the Stock Radio from 2.24.701.1 and also Stock Recovery.

Stock ROM version for these types:
modelid: PN0714000
modelid: PN0710000
cidnum: HTC__044

1.xx ROM’s & Sprint Versions:


Guru Reset M7 1.26.502.12
File Size: 1015.5 MiB - Downloads: 1446
MD5: 30c0072fb5a02ca75a609bc57a3f34e9
Comments: Stock AT&T ROM 1.26.502.12 with graphical aroma installer.  Includes the ability to flash the stock Recovery and also Radio.

OTA Updates immediately!
mid: PN0712000
cid: CWS__001

Guru Reset M7 1.26.502.15
File Size: 1018.8 MiB - Downloads: 1291
MD5: 79d290ec018ea3761e8ad35f62476c5a
Comments: Stock AT&T ROM 1.26.502.15 with graphical aroma installer.  Includes the ability to flash the stock Recovery and also Radio.

OTA Updates immediately!
mid: PN0712000
cid: CWS__001

Guru Reset M7 Sprint 1.31.651.2
File Size: 971.0 MiB - Downloads: 1922
MD5: f3d055dea52b60674833c2cbb87893fb
Comments: Sprint Stock ROM 1.31.651.2 with graphical aroma installer.
Includes the ability to flash the Stock Recovery.

Intended for:
modelid: PN0720000
cidnum: SPCS_001

 

Guru Reset M7 Sprint 1.29.651.10
File Size: 966.1 MiB - Downloads: 1695
MD5: 29a4b3cd30a848a8e6c9e1e7bd079740
Comments: Sprint Stock ROM 1.29.651.10 with graphical aroma installer.
Includes the ability to flash the Stock Recovery.

Intended for:
modelid: PN0720000
cidnum: SPCS_001

Guru Reset M7 Sprint 3.04.651.2
File Size: 1.1 GiB - Downloads: 2368
MD5: 0cc1048c835512e1d988525ea8aa2815
Comments: Sprint Stock ROM 3.04.651.2 with graphical aroma installer. Includes the ability to flash the Stock Recovery.

Intended for:
modelid: PN0720000
cidnum: SPCS_001

Guru Reset M7 1.27.531.11
File Size: 987.5 MiB - Downloads: 944
MD5: f7bd2e1e2e89fab44d8713eda693c0a3
Comments: Stock T-Mobile US ROM 1.27.531.11 with
graphical aroma installer.  Includes the
ability to flash the stock Recovery and also Radio.
OTA Updates, when available.

mid: PN0713000

cid: T-MOB010


Guru Reset M7 1.29.401.13
File Size: 959.2 MiB - Downloads: 1610
MD5: 92987058e9e8c83cd4d88b2f523e359f
Comments: Stock rom 1.29.401.13 with graphical aroma installer.  Includes the ability to flash the stock Radio and Recovery also.
Colors are off in the Aroma Installer. Touchscreen does not work if coming from 2.24 or higher!

Remember this stock rom version is for these types:
modelid: PN0710000
cid: HTC__001, HTC__E11
HTC__102, HTC__203
HTC__405, HTC__Y13
HTC__304, HTC__032
HTC__A07, HTC__J15
HTC__016
If you need any help with these you can use this XDA thread for questions and support:

http://forum.xda-developers.com/showthread.php?p=46236743#post46236743

or

http://forum.xda-developers.com/showthread.php?p=45830261#post45830261

 

More of these are coming soon as I am building more from RUU’s and ROM dumps and Nandroid Backups.

 

If you found these files or the information I provided here helpful please feel free to throw a small donation my way by clicking HERE.

Thank You


 

82 comments

Skip to comment form

  1. Pete

    Failed attempt to RUU.exe my m7 lead me here. Reunlocked my bootloader, flashed in clockworkmod recovery just to find out that touch isn’t working in the aroma installer. Flashed the newest twrp and everything worked like a charm. Running 2.24.401.1 so grapped the same version zip, install from zip, setup my phone and then tested the ota 2.24.401.8 which worked fine. Great package and guide, Thank you. All this because I didn’t s-off…

  2. Bob

    NEED HELP!

    So I’m a complete novice with android rooting however I managed to root my HTC One a week ago. However, now I want to unroot it and I tried using the 2.24.401.8 ROM as my modelid and cidnum matched those. Also, I believe I had the same version before I rooted. However, when I tried using Clockwork Recovery to install the zip, I got “installation aborted”. Is it recommended that I try using the 2.24.401.1 ROM?

  3. Bob

    Just want to update.. I redownloaded the 2.24.401.8 ROM and its working now!
    Thanks for the site man!

  4. sToRmInG

    I would love to try but I have seen that the 2.24.161.1 is only for CID VODAP001 and VODAP102.

    I am currently on the Google Edition. Before that I had a 2.24.161.1 VODAP110 from Swisscom (Swiss Provider). Is there any possibility to add the CID VODAP110?

  5. crushalot

    Yes, the version number is the most important thing. So if you have 2.24.161.1 then it will work. I must have missed that CID. I will add it to the file comments.

    1. sToRmInG

      Thanks a lot.
      I think that maybe the boot.img is different due to the branding but the version number is the same.
      Have you seen my second comment here: http://www.htc1guru.com/dld/guru_reset_m7_2-24-161-1-zip/ ?

      1. crushalot

        The kernel shouldn’t be different for the branding.
        Those backups wouldn’t have the stock recovery correct? I will see if I can compare the kernel to my data.

        1. sToRmInG

          I can provide an OTA for 2.24.161.1. See PM at xda-developers.com (sToRm1nG).

          But I don’t know if you received the PM.

          Details: OTA_M7_UL_JB_50_S_Vodafone_UK_2.24.161.1-1.29.161.11_P_release_325133_signedlqk8p6c09r7kmir2.zip

  6. Qamar Abbas

    Thanks a lot …………. its works like a charm…. i got the OTA

  7. Charlie

    Good work, well done, tx

    Works great

  8. benjamin

    i need help

    i need are
    2.24.75.1 ruu

    for htc one m7 Orange Spain

    1. crushalot

      Sorry don’t have a RUU for that version.
      Best I have is a Stock ROM reset for Orange France.

  9. Jeff

    Downloaded the AT&T version and Chrome detected the file as malicious.

    1. crushalot

      That is normal. It is because it is a Zip file with code and script in it.
      Files are ok.

  10. lakshya dahiya

    pls can u give a frimware and baseband update for htc one update 4.3 for the 2.24.707.3

  11. lakshya dahiya

    plus can u tell me how to get back to stock coz i cant find the ruu for 2.24.707.3 iam s off on hboot 1.54 thank u please help

  12. mobshredder

    Hi, I am now on 2.24.206.7 (O2 UK) with HTC One M7. CID is O2___102. Running HBOOT 1.54.000 S-ON.
    I can’t find a matching Stock for my ONE. I would like to be able to use running stock x.xx.207.x – O2 DE (Germany).

    How can I get into that? I have searched several forums and sites and I can’t get it on alone. If i just had S-OFF it would be much easier.
    Help me please.

    1. crushalot

      You should be able to S-off with rum runner while running 2.24.401.8 and using that version of rumrunner.

  13. Arne

    Hi!
    Hope you can advice me a little here!
    I went from my HTC TMOB101 DE to Google Play edtition and finally I’m back on a working HTC One thanx to this:

    RUU_M7_UL_JB_50_hTC_Asia_WWE_1.29.707.3_R_Radio_4A.14.3250.13_10.33.1150.01_release_311678_signed. I found it on your page and it worked like a charm after downgrading to Hboot 1.44! After this install I got it updated OTA to the verison you se below…

    Relocked Bootloader and S-OFF, no root
    My CID is 11111111
    PN0710000
    H-BOOT 1.54.0000
    Radio 4A.17.3250.14
    OpenDSP-v31.120.274.0716
    OS 2.24.707.1 CL211355 release-keys
    Android 4.2.2
    Sense 5.0
    HTC SDK API-level 5.34
    Kernel-version 3.4.10-g445d072
    root@abm018 #1
    SMP PREEMPT

    The thing is I like to have the latest recovery from your site; OTA_M7_UL_JB43_SENSE55_MR_HTC_Europe_3.62.401.1-2.24.401.8_release_338160gxmo5sd9337kadux

    In order to be able to use this I have to unlock my bootloader again, but now HTCdev tells me that:

    “Error Code: Invalid Bootloader Token Length.
    Error Reason: The submitted Token appears to be the wrong length and won’t work”

    Finally my question ;-)

    Is it possible to use the original unlock_code.bin I got to my CID TMOB101 or will this corrrupt my bootloader?
    Is there any other way to get a clean, unbrande stock JB 43 5.5 EU RUU or zip like the one mentioned above?
    Is it possible to use another way of unlocking my bootloader again?

    Kind regards!
    Arne

    1. crushalot

      You just need to go to htcdev and do the process again to get a new unlock code. You can’t use the first you again.
      The stock ROM for 3.62.401.1 is available here:
      http://www.htc1guru.com/dld/guru_reset_m7_3-62-401-1-zip/

  14. Adam

    Was wondering if anyone can help me. So I was doing a ota update when it crashed. I am unable to mount the system. no ruu for bell I see, also I did unlock my bootloader and install a custom recovery. just cant figure out the next steps. thanks for the help

    version: 0.5
    version-bootloader: 1.44.0000
    version-baseband: 4A.14.3250.13
    version-cpld: None
    version-microp: None
    version-main: 1.29.666.17
    version-misc: PVT SHIP S-ON
    serialno:
    imei:
    meid: 00000000000000
    product: m7_ul
    platform: HBOOT-8064
    modelid: PN0712000
    cidnum: BM___001
    battery-status: good
    battery-voltage: 4336mV
    partition-layout: Generic
    security: on
    build-mode: SHIP
    boot-mode: FASTBOOT

  15. Dene

    Hello guys can you help me please?
    Is Guru_Reset_M7_1.29.401.13 ok for my phone?

    fastboot getvar all
    (bootloader) version: 0.5
    (bootloader) version-bootloader: 1.44.0000
    (bootloader) version-baseband: 4A.14.3250.13
    (bootloader) version-cpld: None
    (bootloader) version-microp: None
    (bootloader) version-main: 1.29.401.16
    (bootloader) version-misc: PVT SHIP S-ON
    (bootloader) serialno:
    (bootloader) imei:
    (bootloader) meid: 00000000000000
    (bootloader) product: m7_ul
    (bootloader) platform: HBOOT-8064
    (bootloader) modelid: PN0710000
    (bootloader) cidnum: HTC__032
    (bootloader) battery-status: good
    (bootloader) battery-voltage: 4322mV
    (bootloader) partition-layout: Generic
    (bootloader) security: on
    (bootloader) build-mode: SHIP
    (bootloader) boot-mode: FASTBOOT

    Thanks for reply.

    1. crushalot

      Yes. Just choose to install the stock recovery during the install and then you should receive an OTA update which will bring your software and firmware to matching updated levels.

  16. stilldmoney

    Hi crushalot!

    Love your video tutorial and its exactly what I needed after searching countless forums with a bunch of different solutions that didn’t answer my questions. This site is GODSEND!!!

    I’m about to reflash to stock from custom rom on 4.3 using your Guru Reset 1.26.502.12. My goal is to update my firmware and gain s-off after restock but I’m unsure if I should do this before or after requesting the ATT OTA.

    Should I flash Guru Reset, run revone then relock and request OTA updates?
    Or should I flash GR, request OTA, then gain s-off with revone?

    MANY MANY THANKS in advanced!!!!

    fastboot getvar all
    (bootloader) version: 0.5
    (bootloader) version-bootloader: 1.44.0000
    (bootloader) version-baseband: 4A.14.3250.13
    (bootloader) version-cpld: None
    (bootloader) version-microp: None
    (bootloader) version-main: 1.26.502.12
    (bootloader) version-misc: PVT SHIP S-ON
    (bootloader) serialno:
    (bootloader) imei:
    (bootloader) meid: 00000000000000
    (bootloader) product: m7_ul
    (bootloader) platform: HBOOT-8064
    (bootloader) modelid: PN0712000
    (bootloader) cidnum: CWS__001
    (bootloader) battery-status: good
    (bootloader) battery-voltage: 3793mV
    (bootloader) partition-layout: Generic
    (bootloader) security: on
    (bootloader) build-mode: SHIP
    (bootloader) boot-mode: FASTBOOT

    1. crushalot

      Most see best results with revone before the OTA.
      Rumrunner should work after but the process is a little more involved.

  17. Marc

    OK, I’m flying blind at the moment and could really use some help. I’ve flashed rooms, recovery, etc before, but at some point while trying to install TWRP, the file either became corrupted or something installed incorrectly. As it stand now my phone is stuck on Android 4.1.2, software version 1.29.666.17. It is from Bell Mobility in Canada. Which of these installation pack would I need to use?

    I’m sorry if I’m asking a lot. This messed up recovery has had me scrambling for weeks trying to figure out how to fix it.

    1. crushalot

      If your bootloader is unlocked then there should be no issue in flashing a recovery.
      I do not have a Guru Reset for x.xx.666.x for for Bell at this time, although I am working on a 4.3 version.
      Your best bet is to use the stock backup and take the OTA update:
      http://www.htc1guru.com/dld/m7-cwm-nandroid-backup-cid-bm___001-1-29-666-5-zip/

      1. Marc

        Thank you for the response. I admit I’ve never done a nandroid backup before. What steps would I need to use it?

  18. Marc

    I should clarify that because of the recovery being messed up, I cannot download the ota updates. As it stand right now, I just want to go back to the stock Rom.

  19. ephargha

    Hi..
    Im using Guru Reset M7 3.63.707.4, latest TWRP touch..
    folow all the instruction on ur video…

    on the process got this on my screen:

    >>Formating partitions
    (system is unmounted already)
    (data is mounted already)

    the proggres bar stucks on 10%

    please help..
    can I reboot my phone? will it brick my phone?
    its been 10 minutes …

    1. crushalot

      No it will not brick your phone. You can just power off and reboot back into recovery and try the install again.

  20. jyuan

    I am currently s-on with firmware INFOversion-main: 2.24.707.3

    can i use the Guru Reset M7 3.63.707.4 to upgrade? CID and MID match with the description.

  21. Glenn

    Hi, I’ve stuffed up my HTC One and am now unable to get it to boot. I’m hoping someone could help me out with this..

    This is my current info:

    C:\HTC\HTC One>fastboot getvar all
    (bootloader) version: 0.5
    (bootloader) version-bootloader: 1.44.0000
    (bootloader) version-baseband: 4A.14.3250.13
    (bootloader) version-cpld: None
    (bootloader) version-microp: None
    (bootloader) version-main: 1.29.841.2
    (bootloader) version-misc: PVT SHIP S-ON
    (bootloader) serialno: HTxxxxxxxxxxxx
    (bootloader) imei: 35xxxxxxxxxxxxxxxx
    (bootloader) meid: 00000000000000
    (bootloader) product: m7_ul
    (bootloader) platform: HBOOT-8064
    (bootloader) modelid: PN0714000
    (bootloader) cidnum: TELST001
    (bootloader) battery-status: good
    (bootloader) battery-voltage: 4191mV
    (bootloader) partition-layout: Generic
    (bootloader) security: on
    (bootloader) build-mode: SHIP
    (bootloader) boot-mode: FASTBOOT
    getvar:all FAILED (status read failed (Too many links))
    finished. total time: 0.049s

    I’ve tried several different ROMs now, they all just sit at the white HTC screen and doesn’t go any further. I have TWRP 2.6.3.3 installed, I can get into TWRP okay. I’m trying to install the ROM Guru_Reset_M7_2.24.841.1.zip.

    Can anyone tell me if this is the correct ROM for me and if so what am I doing wrong. As you can see below it has 24 fails. Ive even tried re-locking the OEM after pushing over the ZIP file.

    C:\HTC\HTC One>fastboot flash zip Guru_Reset_M7_2.24.841.1.zip
    sending ‘zip’ (1060258 KB)…
    OKAY [ 41.582s]
    writing ‘zip’…
    (bootloader) zip header checking…
    (bootloader) zip info parsing…
    FAILED (remote: 24 parsing android-info fail)
    finished. total time: 58.350s

    Any help with this would be greatly appreciated.

    Cheers :)

  22. Raymund

    Is it possible to use guru reset after I put to lock using revone -l? or should I put it back to unlocked before guru reset.

    I am ready to install Guru Reset M7 2.24.707.1, since It matches my CID and MID.

  23. Kenny Doan

    can i use CWM to flash Guru Reset M7 2.24.707.1?

    my HTC information:
    CID: HTC__044
    OS: 2.24.707.3
    HBoot: 1.54
    using Android Revolution HD 31.5

  24. Arpad

    Thank you! I am very happy! Nice job!

  25. adam

    please whic rom comptable for htc one CID: HTC__332

  26. sam

    should i use “Guru Reset Tool” or not ?
    because my phone is s-on and i cant be s-off because my phone is 1.54
    help me plz

  27. Ovidiu

    Could you please post a RUU for CID: ORANG001 (orange UK) or tell me a compatible one from your list? My stock recovery.img is broken I think, phone stuck with “Entering Recovery” text. I am S-ON with an unlocked bootloader and semi-bricked phone (erased data and system partitions). Thank you.

  28. Tony Grippando

    I have an CSpire HTC 1

    The MID on it is: PN0720000
    The CID on it is: UTSI_005

    will you have a stock rom for this device any time soon ???

    Thanks,

    Tony Grippando

    1. Dr.

      hello, did you find a rom for that phone, i am also searching for one.

  29. Jarrod

    Will these downgrade the hboot or is it just the stock rom and recovery that will get flashed? I have mid: PN0714000 cid: HTC__039 currently running JB4.3 and hboot 1.55. I would like to s-off the device in order to try and convert it to a GE phone but currently cannot due to the hboot version.

  30. tony

    Hi wanting to return to stock
    2.24.61.1
    Orang001 orange UK
    Tried your nandroid backup can’t get anything to work thanks

  31. Esi

    hey, i have hbood 1.55 s-on and unlocked bootloader. I someway managed to boot my htc sideloading the guru reset for the TW versio CID_621, but i cant instal ota-s. How can i go to stock without root or s-off? PLease help.

  32. rocky

    Ian having the bootloader screen for my Sprint htcone….,

    tampered
    unlocked
    w7_WLS PVT Ship S-on RH
    HBoot-1.44.0000
    radio-1.00.20.0626
    openDSP-v31.120.274.0617
    emmc-boot

    my current software version is – 1.31.651.2 (rooted)
    model number is- HTC PN072
    I don’t know my cid num ,
    so If i use the “Guru Reset M7 Sprint 1.31.651.2″ to flash and return to stock ,is there any problem like error, touchscreen not working etc
    pls…… help me to get back to stock Rom.

  33. scott

    Are there RUU’s out for the International version (Optus Australia) that is based on software 3.63.980.2?

    Can’t seem to find any information around RUU’s and 4.3 at the moment,

    1. john

      I have the issue finding the ruu for 3.63.980.2 Vodafone aus/nz

  34. Cavernoso

    Thanks so much for this. After hours trying to unbrick the phone this did it. Or almost… The touch screen doesn’t work. I am on Sprint.

    UNLOCKED S-OFF

    CID : SPCS_0001
    HBOOT: 1.55.0000
    RADIO: 1.00.20.0913_3
    OS : 3.04.651.2

    Will reverting my hboot to 1.44 fix the touch screen? that is the only thing that seems different from the original state.

    Thanks again for all the help

  35. Cavernoso

    Ok I flashed hboot 1.44 and still not touch screen. How can I get touch screen to work?

    UNLOCKED S-OFF

    CID : SPCS_0001
    HBOOT: 1.44.0000
    RADIO: 1.00.20.0913_3
    OS : 3.04.651.2

  36. vasy

    Hola,necesito un guru reset de orange España 4.3(3.63.75.3).Me lo pueden hacer porfavor?Muchisimas gracias

  37. Matjaz

    Hello

    I have installed this ROM to my htc one Guru Reset M7 3.62.401.1. It has installed successfuly but after rebot my phone wouldn’t go anywhere but stuck on logo HTC quietly brilliant :( can anybody help me to find the solution so I can have working phone back :(

    My phone:
    M7_UL pvt s-on rh
    hboot 1.55.0000
    radio-4a.21.3263.04
    OpenDSP-v32.120.274.0909
    os-3.62.401.1

  38. ahmad

    hello i have HTC ONE ON SPRINT but i make for it wipedata / factory reset from recovery and after that my mobile is dead ( freeze on htc icon ) and not work
    my mobile is unlocked fastboot

    c:\Android>fastboot getvar all
    (bootloader) version: 0.5
    (bootloader) version-bootloader: 1.55.0000
    (bootloader) version-baseband: 1.00.20.0913_3
    (bootloader) version-cpld: None
    (bootloader) version-microp: None
    (bootloader) version-main: 3.04.651.2
    (bootloader) version-misc: PVT SHIP S-ON
    (bootloader) serialno: FA34AS911064
    (bootloader) imei: 990001465668945
    (bootloader) meid: 99000146566894
    (bootloader) product: m7_wls
    (bootloader) platform: HBOOT-8064
    (bootloader) modelid: PN0720000
    (bootloader) cidnum: SPCS_001
    (bootloader) battery-status: good
    (bootloader) battery-voltage: 4116mV
    (bootloader) partition-layout: Generic
    (bootloader) security: on
    (bootloader) build-mode: SHIP
    (bootloader) boot-mode: FASTBOOT
    (bootloader) commitno-bootloader: dirty-371c4f408e
    (bootloader) hbootpreupdate: 11
    (bootloader) gencheckpt: 0

    please can you tell how can i fix this problem ???

    thanks alot

  39. Roger

    Hello, I have a Asis HK machine and I want to have the ruu for reset the phone, so which one I should used ??

  40. Karim

    hi Crushalot,

    i have AT&T unlocked htc one, with Hboot 1.44.000
    i dont have the CID on my bootloader.
    Tampered and Unlocked.
    was on KitKat 4.4 recovery 2.6.3.3 twrp
    i wanted to stock it to get the ota
    radio 4A.14.3250.13
    S-ON
    M7_UL
    open DSP-v26.120.274.0202

    please help me get it out of the boot loop. i tried the file
    RUU_M7_UL_JB_50_Cingular_US_1.26.502.12_Radio_4A.14.3250.13_10.33.1150.01_release_318450_signed_2

    but it gave error 155, wrong rom or so.

    please let me know if i’m doing something wrong.

    1. Karim

      i also found this list if it helps

      (bootloader) version: 0.5
      (bootloader) version-bootloader: 1.44.0000
      (bootloader) version-baseband: 4A.14.3250.13
      (bootloader) version-cpld: None
      (bootloader) version-microp: None
      (bootloader) version-main: 1.26.502.12
      (bootloader) version-misc: PVT SHIP S-ON
      (bootloader) serialno: HT344W907831
      (bootloader) imei: 354439054276722
      (bootloader) meid: 00000000000000
      (bootloader) product: m7_ul
      (bootloader) platform: HBOOT-8064
      (bootloader) modelid: PN0712000
      (bootloader) cidnum: CWS__001
      (bootloader) battery-status: good
      (bootloader) battery-voltage: 4234mV
      (bootloader) partition-layout: Generic
      (bootloader) security: on
      (bootloader) build-mode: SHIP
      (bootloader) boot-mode: FASTBOOT

  41. Metanol

    How do i copy the ZIP file to the device, i’m S-ON and i can not write any file on the internal memory. On the video it starts the recovery with an already copied reset file.

    1. max

      I have a the same problem. I am stuck on bootloader with S-On. how I can install a Rom?

  42. M.Fero

    Can you help me with this please
    C:\One_XPlus_All-In-One_Kit_v3.0\Data>fastboot getvar all

    (bootloader) version: 0.5a
    (bootloader) version-bootloader: 1.72.0000
    (bootloader) version-baseband: 3.1204.171.33
    (bootloader) version-cpld: None
    (bootloader) version-microp: None
    (bootloader) version-main: 2.18.401.2
    (bootloader) serialno: FA2BFW105337
    (bootloader) imei: 353567051259118
    (bootloader) product: enrc2b_u
    (bootloader) platform: HBOOT-T30S
    (bootloader) modelid: PM3511000
    (bootloader) cidnum: HTC__J15
    (bootloader) battery-status: good
    (bootloader) battery-voltage: 4246mV
    (bootloader) devpower: 97
    (bootloader) partition-layout: None
    (bootloader) security: on
    (bootloader) build-mode: SHIP
    (bootloader) boot-mode: FASTBOOT
    (bootloader) commitno-bootloader: None
    (bootloader) hbootpreupdate: 2
    (bootloader) gencheckpt: 0

    i cant find any RUU exe valid + i deleted my system now im stuck with (bootloader and its tools) Thank You

  43. max

    Can somebody help me please? I am stuck on bootloader (S-On) with teamwin recovery.

    the system is deleted. I can not access usb debugging or making s-off with rumrunner.

    any help would be truly appreciated.

    version: 0.5
    version-bootloader:
    version-baseband: 4A
    version-cpld: None
    version-microp: None
    version-main: 3.62.4
    version-misc: PVT SH
    serialno: SH361W9013
    imei: 35443605978456
    meid: 00000000000000
    product: m7_ul
    platform: HBOOT-8064
    modelid: PN0710000
    cidnum: HTC__E11
    battery-status: good
    battery-voltage: 411
    partition-layout: Ge
    security: on
    build-mode: SHIP
    boot-mode: FASTBOOT
    commitno-bootloader:
    hbootpreupdate: 11
    gencheckpt: 0

  44. max

    hi,
    Finally, I got the solution. if somebody has the same issue like mine contact me on sk ype mas.nik1.
    I will help you .

  45. cactus

    Hi there,

    I’m pretty new to HTC and to Android as well, so please help me get the whole ROM thing cleared.
    I just bought a HTC ONE 32GB black mobile with details below

    M7_UL PVT
    cid: HTC__622
    mid: PN0714000
    main version: 2.24.708.4
    hboot: 1.54.0000
    radio: 4A.18.3250.15
    os: 2.24.708.4

    I use this mobile in Hungary, Europe

    My question is, am I able to switch the ROM to get europian OTA updates? Is WWE contain the Hungarian language? Exacly which RUU should I use, or what am I supposted to do for changeing asian ROM to a europian? Does the changeing of cid and mid affect the mobile functionality?

    Thank you
    cactus

  46. KJ

    Hi Crush,
    I used your Guru Reset 3.63.707.4 and as promised I’ve got an OTA for 4.20.707.6.
    I downloaded it and installed but when it started to install for approximately 20% it got stuck then from the progress screen changed to the triangle with “!”
    Then stuck… Please help………
    Thanks in advance.

    Here is some info:
    ***UNLOCKED***
    M7_UL PVT SHIP S-OFF RH
    CID-11111111
    HBOOT-1.55.0000
    RADIO-4A.21.3263.04
    OpenDSP-v32.120.274.0909
    OS3.63.707.3

    1. KJ

      Oh never mind… I did Guru Reset 2.24.707.1 and OTA to 3.63.707.3 and OTA again… and it worked…
      Thanks!!!
      Crushalot <— savior!!!

      1. VH

        Hi KJ, I have the same problem with same build version. it would be great if you can help me. here but my phone has S-ON. and HBOOT-1.56.0000.
        is it nessasory to do S-OFF?

  47. Roméo

    Hi,

    When can we expect to have Guru Rest M7 4.19.401.8 ?

    Thank you

  48. chris

    Which stock reset should i use to go back to stock. I’m on bell mobility in Canada and here is the rest of my phone
    m7_ul pvt ships s-off RH
    cid-11111111
    hboot 1.54.0000
    opendsp v31
    0s=3.06.1700.10
    emmc-boot

  49. Paco

    Hi,

    For the CID: HTC__322 wich one is the best??

    or can you upload for this CID???

  50. gmt

    Hi, your Guru Reset M7 3.62.401.1 saved me from a soft bricked HTC ONE M7. Long story short I had the phone on 4.3 rooted and TWRP installed and I have tried to install 4.4.2 firmware.zip through fastboot flash, it worked but it bricked it. Till I not used your reset file I could not get past fastboot menu. The problem now is that even I have it up and running, it shows 4.3 and so on everything works fine, the OTA update check though it says “No updates for your phone” so it looks like it cannot get the updates. I suspect that the stock recovery was not set back properly:

    Whenever I boot in to recovery I get this message:

    mount SDCARD failed 1 times
    mount SDCARD failed 2 times
    mount SDCARD failed 3 times
    mount SDCARD failed 4 times
    mount SDCARD failed 5 times
    can not mount SD card. (No such file or directory)
    Disable host mode:0

    And the phone reboots

    My question: is that normal? I suppose not, and how it can be fixed?
    If I am doing a “fastboot getvar all” now I get:

    (bootloader) version: 0.5
    (bootloader) version-bootloader: 1.56.0000
    (bootloader) version-baseband: 4A.23.3263.28
    (bootloader) version-cpld: None
    (bootloader) version-microp: None
    (bootloader) version-main: 4.19.401.9
    (bootloader) version-misc: PVT SHIP S-ON
    (bootloader) serialno:
    (bootloader) imei:
    (bootloader) meid: 00000000000000
    (bootloader) product: m7_ul
    (bootloader) platform: HBOOT-8064
    (bootloader) modelid: PN0710000
    (bootloader) cidnum: HTC__102
    (bootloader) battery-status: good
    (bootloader) battery-voltage: 4022mV
    (bootloader) partition-layout: Generic
    (bootloader) security: on
    (bootloader) build-mode: SHIP
    (bootloader) boot-mode: FASTBOOT
    (bootloader) commitno-bootloader: dirty-4dab9d12
    (bootloader) hbootpreupdate: 11
    (bootloader) gencheckpt: 0
    all: Done!
    finished. total time: 0.058s

    Which to me it looks like the bootloader is at KitKat version 4.4.2 as it looks exactly like the number in the OTA update OTA_M7_UL_K44_SENSE55_MR_HTC_Europe_4.19.401.9_R-3.62.401.1_release_353071ka19rmkvzdvkhpf4.zip)

    Should I fastboot flash the recovery.img and boot.img from Guru Reset M7 3.62.401.1 package, I suspect that because the version was inferior to the one on the phone it was not overwritten.

    Best regards,

  51. gmt

    Hi, in extent to my previous comment maybe we can have a Guru Reset M7 4.19.401.9 soon… :-)

  52. VH

    Hi All, I need help.
    I have HTC one M7.
    device details is:
    M7_UL PVT SHIP S-ON RH
    HBOOT: 1.56.0000
    RADIO-4a.23.3263.28
    OpenDSP-v32.120.274.0909
    OS:4.20.707.6

    And it had firmware 4.20.707.6. but my brother had installed recovery and flashed other ROM. I want to go back to stock rom and get proper OTA updates. we flashed phone with Guru Reset 3.63.707.4 with TWRP recovery. Guru Reset install was successfull. And I do get the update also. But i installation for new update fails with triangle with “!” (red).
    I have also tried with Guru Reset 2.24.707.1. Here installation is successfull but after that phone is in boot loop. So again i need to use recovery and get the Guru Reset 3.63.707.4.

    NOTE: after both the guru reset 3.63.707.4 and 2.24.707.1 also phone shows OS:4.20.707.6.

    I will be very thankfull if any one can help me with the problem here. I want to go for the stock rom where i get OTA updates.
    Thanks in advance. looking eagarly for the reply.

  53. Tanveer

    HI VH,

    You should wait for s-off tools with Hboot 1.56, as far i know till now 4 march 2014 there is no option to get s-off on Hboot 1.56 and once we get S-off on 1.56 Hboot you can do what you want.

  54. sree

    working great for htc one at&t
    but when i check for the software update, I cant get it.

  55. Adarsh

    [img]http://imageshack.com/a/img132/5541/vvst.jpg[/img]

    This is the problem i’m getting pls guide me to fix this with stock software. i’m completly noob

  56. SiaO

    Hi all,

    I have HTC one M7.
    M7_UL PVT SHIP S-ON RH
    HBOOT: 1.56.0000

    Same as VH, i downloaded the 3.63.707.4 and receive an OTA update but fails to install. It came out an Red triangle..anyway to solve this besides s-off?

  57. wewenk

    Dear Crushalot,

    Any chance you build guru reset tools for M7CDWG Indian version since the ruu for this variant is none?
    Thanks.

  58. Lol

    Please upload the 401.11 Kit Kat. Thx

  59. David

    Thank you for the brilliant website. I’ve use one of the nandroid backups for my carrier (EE UK) but I now keep getting the message that an OTA is available (Android 4.3 sense 5.5). I have root and was previously running a stock android 4.4 version for international variant. I returned to stock rom so I could use EE Cash on Tap – and i would like to be able to keep using this app.

    I have tried installing several different stock recoveries but nothing seems to let the OTA install. It gets halfway through the loading (blue exclamation) but then goes to red warning triangle for about a minute before rebooting.

    If anyone could shed any light on the cause of the error and what I could try to fix it I would be extremely grateful. Thanks in advance!

    I’m currently running:
    Android 4.2.2
    Sense 5.0
    Software Number 2.24.61.1
    HTC SDK API Level 5.34
    Kernel3.4.10-g445d072root@abm009#1 SMP PREEMPT
    Baseband version 4A.21.3263.04_10.38.m.1157.04L
    Build Number 2.24.61.1 CL211355 release-keys

    M7-UL PVT SHIP S-ON RH
    HBOOT-1.55.0000
    Radio-4A.21.3263.04
    OpenDSP -v32.120.274.0909
    OS 3.63.61.1
    eMMC-boot 2048mb

    1. David

      OK – Used French Orange Stock Recovery from Guru Reset – thank you for the files. Is it possible to now root and keep stock recovery?

      1. Andy Long

        Hi David,

        I have Orange HTC One with TWRP custom recovery running 4.3 Sense 5.5 and S-OFF. Are you saying that the French Orange RUU will work and return phone to stock for OTA update to 4.4.2?

        I had been using CM11, but have reloaded my stock backup that I created before wiping my device.

        THanks

        Andy

  60. Toxicology

    Hey everyone….here is my config and I just want to know, which RUU I have to use to get back to stock , “locked” and S-on again.

    (bootloader) version: 0.5
    (bootloader) version-bootloader: 1.56.0000
    (bootloader) version-baseband: 4A.25.3263.21
    (bootloader) version-cpld: None
    (bootloader) version-microp: None
    (bootloader) version-main: 4.19.401.11
    (bootloader) version-misc: PVT SHIP S-OFF
    (bootloader) serialno:
    (bootloader) imei:
    (bootloader) meid: 00000000000000
    (bootloader) product: m7_ul
    (bootloader) platform: HBOOT-8064
    (bootloader) modelid: PN0710000
    (bootloader) cidnum: 11111111
    (bootloader) battery-status: good
    (bootloader) battery-voltage: 3942mV
    (bootloader) partition-layout: Generic
    (bootloader) security: off
    (bootloader) build-mode: SHIP
    (bootloader) boot-mode: FASTBOOT
    (bootloader) commitno-bootloader: dirty-4dab9d12
    (bootloader) hbootpreupdate: 11
    (bootloader) gencheckpt: 0

    Thx in advance!!!

  61. Daniel

    hi, what is the ruu taht i need for my htc one of nextel mexico

    my english y very bad jaja

Leave a Reply

Your email address will not be published. Required fields are marked *